We get this question a lot, because there is a fear that PIN codes can be guessed or easily distributed by valid system users. To combat those few bad eggs out there, there are some safeguards to make it difficult if not impossible to hack the code.
Start by using a strong PIN code, something greater than 5 digits. Brivo supports PINs up to 8 digits, which would be 100,000,000 combinations
Utilize Brivo's Invalid PINs Threshold. You can set a limit for the number of attempts before the system temporarily shuts down and doesn’t allow any input. The number of attempts can be set between 1-10. Go to SETUP >> Sites/Doors >> Sites, then click on the door name to setup and Edit that door.
You have a shutdown period after too many
attempts have been made. That period can
be set from 10 seconds to 5 minutes before another PIN can be entered. If I continued to enter PINs in that period
of time, the system will not register any of those inputs. Go to SETUP >> Sites/Doors >> Sites, then click on the door name to setup and Edit that door.
Invalid PINs Shutdown Setup an automated notification when a bad PIN is entered.
Go to SETUP >> Notifications >> New Notification
Invalid PIN Notification Add Integrated Video. This will allow you to see all door events from a phone or web. Coupled with Notifications, you can easily pull the video to see the culprit entering the bad PIN code.
To learn more about Integrated Video go to https://www.latitudesecurity.com/av-integration