Brivo Access Cam Installation
Related Articles
Assign or Revoke Cards from Users in Brivo OnAir
Overview This section provides instructions for assigning and revoking proximity cards, which need to be performed using the Brivo OnAir web application. Card Bank Before any cards can be assigned to users, the card ID(s) must exist in the Brivo ...
Adding Users to Brivo Access
Overview The following instructions will guide you through the steps involved in adding new users to the Brivo Access software. Create Identity 1. Login to Brivo Access as an administrator 2. From the left menu, click on Users >> Users, and click on ...
Card Bank - Using Offset for Barcodes (ADVANCED USERS ONLY)
The Standard 26-Bit Format The format in which a card is programmed is determined by the data pattern that will be compatible with the access control panel. 26-bit Wiegand specifies a facility code range from 0 - 255 and card number range from 1 ...
Installing a Brivo Cellular Module
Overview The Brivo cellular module is a great way to deliver Internet where the service doesn't exist. It is more reliable than wi-fi and not dependent on any wiring. The following guide provides installation instructions for control panels provided ...
Change Door Access Within a User Group
Overview Groups define who has access to which door and when. Users are assigned to at least one group. If a user isn't assigned to a group, that user will not have access to any doors. The following instructions demonstrate how to add and remove ...