Revoking Card from User

Revoking Card from User

The following provides instruction on how to recycle a card that was once used by a user and needs to be reassigned to a new user.  

  1. Login is Brivo OnAir as an Admin user (https://acs.brivo.com/)
  2. Go to SETUP >> Cards >> Card Bank
  3. Scroll to the bottom of the page and use the Jump To field to find the card number that needs to be revoked from the old user.
  4. The row containing the card ID will be highlighted.  Click the RED icon in the Revoke column.
  5. Approve the warning message.
  6. This will make the card available again to be reassigned, whether you are using Brivo to assign or another application such as a membership management program.  


    • Related Articles

    • Assign or Revoke Cards from Users in Brivo OnAir

      Overview This section provides instructions for assigning and revoking proximity cards, which need to be performed using the Brivo OnAir web application.  Card Bank Before any cards can be assigned to users, the card ID(s) must exist in the Brivo ...
    • Card Bank - Using Offset for Barcodes (ADVANCED USERS ONLY)

      The Standard 26-Bit Format The format in which a card is programmed is determined by the data pattern that will be compatible with the access control panel.  26-bit Wiegand specifies a facility code range from 0 - 255 and card number range from 1 ...
    • Adding Unknown Credentials to the Card Bank

      Overview Brivo can analyze almost any credential (RFID card or fob) by simply scanning the credential at a compatible reader. This function enables unknown cards to be easily added to the Brivo account and assigned to a user. Analyze the Credential ...
    • Assign or Remove User's PIN Code

      Overview This section provides instructions for assigning a PIN code credential to users. A PIN code credential allows a user to unlock a door with a designated numeric combination, removing the need for individual authentication devices such as ...
    • Create a User

      Create a User