View Cameras
After adding a camera, it will be available under cameras on the left side. Tags given to cameras show up in this camera section. Tag based layouts are similar to regular layouts but do not allow customization.
Related Articles
Adding & Removing Cameras
Adding Cameras to an Eagle Eye Bridge or CMVR 1. Login to Eagle Eye. 2. The default view should be the Dashboard. If not, Navigate to the Dashboard using the left-hand menu 3. Any cameras connected to the CamLAN or the same LAN as the bridge will be ...Configuring ENS Cameras for Eagle Eye Networks
Overview From the factory, ENS cameras cannot be discovered by video management systems like Eagle Eye and OpenEye. The cameras must be initialized and then configured before shipping to the client in order to ensure compatibility with their system ...Installing The Eagle Eye System
Overview Congratulations on your recent purchase of the Eagle Eye Video Management System. Your system is shipped in a pre-configured state. This means your Eagle Eye account has been created, and the CMVR has been added to your account. If you ...Resize a Camera Layout
You can resize and rearrange cameras inside of a layout by choosing Edit from the layout menu in the upper left.Camio Hardware Installation Guide
Camera Angle Whether a camera was purchased specifically for your tailgating solution or you are using cameras from an existing system, certain guidelines regarding the camera angle must be met in order to have accurate results. Please install or ...